Xhorse SMART KEY BOX is aiming to help users achieve a non-remote driving experience. By installing the tool into your car, your smartphone is able to work as an independent car key.
Usually, it inherits all of the functions of your original remote, including lock, unlock, panic and trunk. Keyless entry is also a function that can be performed on your smartphone.
Xhorse XDSKE0EN Smart Key Box Bluetooth Adapter
The Xhorse Smart Key Box is an adapter that can be used to access a vehicle using a mobile phone app via Bluetooth connection. With this adapter, you can add Bluetooth Connectivity to the Central Locking System / Keyless Entry System of any vehicle that you can configure an Xhorse Universal Remote to operate. This smart key box adapter will allow wireless (via bluetooth) locking, unlocking, and remote start. Keep in mind that this adapter does not add any of these features to the vehicle. In order for this adapter to wirelessly lock, unlock, or remotely start the vehicle, these features have to already be functioning in the vehicle before the Xhorse Smart Key Box is installed.
It adpots advanced RF technology and is suitable for the car with push start function.
Support add smart key for car
Support add or modify the keyless-enter function
Use VVDI Device to generate remote control. Compatible with device: MINI Key Tool, Key Tool Max, Key tool Plus, VVDI2
Xhorse XDSKE0EN Smart Key Box Adater Highlights:
Easy to install
Short time Delay
Smart APP Control
Wide vehicle Application
No need to disassemble the vehicle
Multiple Remotes & Smartphones Supported
One year warranty
Lifetime Free Technical support
Xhorse Smart Box Adapter Installation Steps:
1, Take out the original remote control, solder the cable according to the soldering diagram of the original remote control, pay attention to the direction.
2, Connect the RF antenna, LF antenna (connect any two interfacesof Lfantenna), and the original remote control to be transferred.
3, Find the Vbat wire and ground wire from fuse box, OBD interface or other locations
4, Find the ACC signal line (the original car radio, the line with electricity after the navigation power onorthe instrument!ight on)
5, Connect the Vbat wire, ground wire and ACC wire of thepower supply cable to the car
6, Setting DIPswitch;
7, Bindings of remote control and mobile phone (refer to binding instruction);
8, Install complete;
9, After installed, take a key close to the car, test the automatic unlock and lock function if you stay away (test other keys in the same way)
10, Test unlock, lock, trunk and car panic function after connecting with APP.
The installation process in a glance:
Solder Supplied Wires To The PCB Of An Xhorse Universal Remote
Program This Remote To The Vehicle
Connect The Smart Key Box To The Vehicle Through The OBD2 Connector
A maximum of 6 mobile phones and 6 smart keys are supported by this device.
1pc smart box
2pcs LF antenna
1pc RF antenna
1pc Power supply cable
1pc User manual
1pc Product quality certificate
If you have any questions, please do not hesitate to contact us.
Xhorse remote car unlocking APP introduction
Xhorse Smart Key Box: Turn the car key into your mobile app
Xhorse Smart Key Box User Guide
Xhorse Smart Key Box is aiming to help users achieve a non-remote driving experience. By installing the tool into your car, your smartphone is able to work as an independent car key. Here we’re going to show you from remote programming to installing an Xhorse smart key box for a Nissan Versa 2014.
Part 1.Remote programming
Connect Xhorse VVDI Mini OBD Tool to the vehicle, and
Connect Xhorse VVDI Key Tool Max to VVDI Mini OBD.
Immo Programming>>Nissan>>Select from system>>Remote Key Adaptation>>Type 1>>Start execution>>Program remote
Then follow the prompt to program a new remote.
Part 2.Xhorse smart key box setup
Remove screws and open up the smart key box.
Then remove the outer shell to get the PCB.
Take out the 10-wire rainbow connector and make sure the wires are soldered to the correct points.
Then insert the connector into the smart key box board.
Go ahead and set dip switch 1 to “ON”.
Part 3.Xhorse smart key box installation
Inset power supply cable to the OBD port.
Take out the RF antenna to install on or under driver dashboard.
Connect RF antenna and OBD power supply cable to the rear of the smart key box.
Part 4.Xhorse smart key box and app setting
Press and hold the learning button until 3 seconds of beep and the indicator lighting on, which means the learning process has begun.
Then open up the Xhorse SmartKey app.
Press the “Connect the car” button, turn on Bluetooth and select your smart key box.
Then you can exit the process, or the smart key box can save and connect to six remotes or phones at a time except the original remote.
End the learning process by holding the button again until 3 seconds of beep and the indicator off.
Besides, you can adjust the settings.
Select “Automatically set” and turn Bluetooth to automatic set, or adjust the signal strength as you like.
Done! Simple and nice!
That’s the Xhorse SmartKey Box that makes you unlock the car by your phone.