Product Description
AUDI C6 Q7 A6 Steer Module J518 ELV Module Emulator with VVDI Dedicated programming cable applied to repair the AUDI sixth Gen A6 Q7 Audi C6 steering column lock J518 ELV module failure replacement emulator. Easy for replacing, write in the dump form original J518 Module with the WVDI PROG dedicated line directly, No need for solder wire.
J518 ELV Emulator for AUDI C6 Q7 A6 Steer Module with VVDI Dedicated Programming Cable
Highlight of AUDI Steer Module J518 ELV Emulator:
- 1. Stable and durable, No Vulnerable components such as relays, microswitch, and motors on it.
- 2. Universal solution, three types MCU all can be replaced by this emulator. (replace MCU Mask: 1L59W, 3L40K, OL01Y directly)
- 3. Easy for replacing, write in the dump form original J518 Module with the WVDI PROG dedicated line directly, No need for solder wire.
The emulator without lock or on lock function, if need the same function as the original J518 Module, please buy the J518 Replacement
The VVDI PROG dedicated programming cable connector here is only for programming the emulator board, not for the original J518 PCB board.
so if you have a car that needs to replace the J518 module with this emulator, you need to read out the data in the MCU by soldering wire or other methods, then write the data into the emulator MCU via this Dedicated cable connector.
The J518 ELV Emulator Replacement PCB Display:
Change Steps:
1. Read out the EEPROM data from the original J518 module of your car (the emulator was already with flash data)
2. Write the EEPROM data you got in Step 1 into the emulator (if the original J518 MCU mask is 0L01Y, write the EEPROM data you got from step1 into the emulator directly; or if the MCU mask of the original J518 is 1L59W/3L40K, you need to send EEPROM data to an expert to transfer EEPROM data when you write into the emulator directly. We don't provide the service)
Note:
1. Work with VVDI Prog
1. Only Need to Write EEprom Data, No Need to Write Other Data Like Flash. etc.
2. Please Choose Only The "J518 (2010-) 0L01Y" in VVDI Prog Software, no matter your car model before 2010 or after.
J518 ELV Emulator Connect with VVDI Prog Display:
Package includes:
1pc x AUDI C6 Q7 A6 Steer column module J518 ELV Module Emulator with VVDI Dedicated programming cable
Contact Information:
If you have any questions, please do not hesitate to contact us.
