BMW X5 F15 all key lost - VVDI Key Tool Plus & BMW FEM Test Platform

Matched product:

New Type Test Platform - BMW FEM/BDC BMW F20 F30 F35 X5 X6 I3 with Black Case choose SK348

4 Reviews

Latest price:£59$71.98€67^.90

£54$65.88€62^.158% off

• Item No. SK228-1
• Out Of Stock

When making keys, BMW F series FEM & BDC all need to preprocess the IMMO box.. If there is no test platform, it needs to disassemble and install the control unit in the car back and forth.. Using our test platform can be completed on the bench,It's both economical and convenient.it is with high quality and low price.

This is a test on how to add a new key for BMW X5 F15 by Xhorse VVDI Key Tool Plus with BMW FEM/BDC Test Platform on bench.

Tools:

Xhorse VVDI Key Tool Plus

BMW FEM/BDC Test Platform

Remove the FEM under the glove box.

Pull out the fuses and open the outer shell.

Leave the front cover aside and restore the back cover and fuses.

Use CON7 and CON8 to connect BMW FEM/BDC Test Platform and the FEM.

Use the main cable to connect Xhorse VVDI Key Tool Plus and BMW Test Platform and supply power to test platform.

Then press

Immo Programming>>Europe>>BMW>>Select from system>>FEM/BDC IMMO system>>Key function>>Start programming>>Read key information

Here we can see key frequency and other parameters.

Press “Continue” to enter the main menu of key function.

Select

Programming FEM/BDC system>>Process Wizard mode

Here watch the operation instructions, then press “Begin” to start it.

Disconnect test platform and open the FEM.

Check the diagrams to figure out where the 95128/95256 chip is and how to use EEPROM adapter (XDNP 10).

After reading EEPROM data success, restore the FEM shell, test platform and power supply.

Press “OK” to upload flash data.

Then open the FEM shell to write the original EEPROM file to the 95128/95256 chip as the prompt.

After reading success, restore the FEM, test platform and power supply again.

Press “OK” to verify the data.

Now FEM programming success. We can make new dealer key.

Back to the main menu of “Key function”. Press

Prepare dealer key with ignition switch>>Key 3 FFFFF Enable>>Have a working key

Insert working key to ignition switch then press OK.

Then insert a new key to ignition switch. Key learn success!

Press “Read key information” and we’ll see the new key data file is in memory.

This is how we use Xhorse VVDI Key Tool Plus and BMW FEM/BDC Test Platform to add a new key for BMW X5 F15 on bench.

Complete!