Black Friday Sale Xhorse VVDI2 Full + GT100 ECU Connector + BMW FEM Platform + BMW CAS 4 Test Platform Bundle Package

Product Description

Xhorse VVDI2 Full + GT100 ECU Connector + BMW FEM Platform + BMW CAS 4 Test Platform Bundle Package
 

• EU/UK Ship, no tax 

This Bundle Package Includes:
Xhorse VVDI2 Full
GT100 ECU Connector
BMW FEM Platform
BMW CAS4 Platform

VVDI2 FULL Included 13 software activated:

• 1. √ VV-01 VAG 4th immobilizer
• 2. √ VV-02 VAG 5th immobilizer
• 3. √ VV-03 VAG Copy 48 transponder by OBDII
• 4. √ VV-04 ID48 96Bit Copy
• 5. √ VV-05 VAG MQB Immobilizer
• 6. √ VB-01 BMW OBD
• 7. √ VB-02 BMW CAS4
• 8. √ VB-03 FEM/BDC Function
• 9. √ VP-01 immo data tool
• 10. √ VPSA-01 PSA
• 11. √ VK-01 Transponder Programmer
• 12. √ VJ-01 Passthru J2534
• 13. √ V7-01 Prepare Toyota H Chip

Xhorse VVDI2 Full Programmer Highlight:

• Update Online Free Lifetime. (Please note: VVDI2 connects to the server and synchronizes once every 31 days. This process is done automatically by itself for 1 day, internet connection is required for this process)
• Support VW, Audi, BMW, PSA(PSA Software only support key learn and read pin code)
• VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, BMW Multi Tool & CAS Plus for BMW Multi Tool
• MQB Key Learn authorization free. KM function is OK to use. But ID48 authorization still need to purchase.
• Already open OBD read MED17/EDC17 PIN / CS / MAC, calculate OBD data online, calculate EEPROM / FLASH for PIN/MAC/CS.
• Free active the pin, cs, mac authorization and change remote database English language. After you receive VVDI2 Full, please provide VVDI2 serial number.
• 

VVDI2 Language:

VVDI2 for BMW language: English, Italian, Spanish, Polish, German, Hungarian, Chinese
VVDI2 for VAG language: English, Polish, Spanish, Chinese
VVDI2 for Porsche language: English, Polish, Spanish, Chinese
VVDI2 for PSA language: English, Polish, Spanish, Chinese
VVDI2 for Transponder programmer language: English, Polish, Spanish, Chinese

Xhorse VVDI2 Using Tips:

1. It connects to the server and synchronizes once every 31 days. This process is done automatically by itself for 1 day, an internet connection is required for this process.
2. Toyota H Chip authorization is already activated from now on.
If not, or customer boguht the seperate authorization, please follow the procedure: download the Xhorse APP, register with your phone number, select in Xhorse Upgrade Kit Software bind, log in Customer Self Service, click "Activate H". Then update your VVDI2 firmware.
3. Please use newest software and firmware version, or will get "not connect error".
4. Transponder programmer database, from now on, all new one is English GL version, if the previous is in Chinese, please contact Susie with SN and country, and we will help you change it to GL English.
5. VVDI2 ID48 clone needs to use with ID48 data collector. And each time online calculation will cost 100 points or 1.

How to Get VT-01 Toyota H Chip Authorization

• 1) Download Xhorse App, Connect VVDI2 To Pc Via USB Cable.
• 2) Open Upgrade Kit, Select in xhorse update kit software bind.
• 3) Click View My Bonus Points.
• 4) Log in Customer Self Service, Select Activate H.
• 5) Update your VVDI2 firmware.

Xhorse VVDI2 Parameter

• Working temperature -20~70℃
• Storeteamperature -40~80℃
• Item dimension 146*85*33mm
• Package dimension 355*283*87mm
• Net weight 0.23KG
• Gross weight 1.5KG
• Power 1W
• USB Interface USB 2.0

GODIAG GT100+ Highlights

• 1 year warranty.
• Used with KESS V2 and Ktag
• ECU connection + OBDII Protocol Detector + Electronic Current Display
• The cable can be extended, with an Optional dedicated adapter
• Compatible with tools from LAUNCH, AUTEL, FOXWELL, XHORSE, VXDIAG and so on
• Convert OBD1 diagnostic interface to the standard OBD2 diagnostic interface
• Used with BMW-CAS4 Adapter test platform to detect whether the CAS4 key programming work perfectly or not

GODIAG GT100 function and operation guide 
- By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100's LED will indicate whether the OBDII diagnostic interface has a good communication with the car.


- Monitor the voltage of vehicle OBDII interface and display it in real time. If it is less than 11V, please stop the diagnosis and programming to avoid the vehicle being unable to start/data loss/module locked.


1. OBDII Protocol Detector & communication detection 


 
1). Connect GODIAG GT100 to the OBDII diagnostic port of the car. 
2). When the device displays the voltage, turn on the power switch of GODIAG GT100.
3). Then connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. ( If the CAN protocol is detected, it will have the maximum brightness. When the communication is successful, the corresponding CAN-H and CAN-L will dim or twinkling weakly)  

2. ECU connection: single module connection


GODIAG GT100, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.


1). Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)
2). The Godiag GT100 can be powered by connecting to the OBDII diagnostic interface of car, or by an AC power adapter.
3). To diagnose and program for a single ECU by connecting the diagnostic tool or ECU programmer.


3. Banana plug extension connection:

Extend the car's OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.



4. Convert OBD1 diagnostic interface to the standard OBD2

Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.
 


5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.


6. When to use the extension cables: The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.



7. Able to power the car when replacing the used battery.




1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.
[Notice 1. Turn on the power switch of Godiag GT100. 2. Don't turn on the ignition switch, don't start the car]

2). Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module.


8. The dedicated adapter will be released (help GT100 connect to the special ECU module)


Hardware Connection Diagram:

GODIAG Test Platform for BMW FEM/ BDC Programming

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system.
2. Perform the synchronization test for the programmed FEM / BDC and the key
3. Provide a test environment for the engineers who professionally recycle FEM/BDC.
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly.
5. Provide professional engineers with connecting FEM BDC modules and instrument.

GODIAG BMW CAS4 / CAS4+ Programming Test Platform

Godiag CAS4 / CAS4+ programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 / CAS4+ programming engineers.
1. By working together with Godiag GT100 & xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost,
can add new key and replace CAS4 / CAS4+ ECU module.


Package includes:
1set* Xhorse VVDI2 Full
1set* GT100 ECU Connector
1set* BMW FEM Platform
1set* BMW CAS4 Platform