Xhorse VVDI BIMTOOL PRO Technical Support

---

Matched product:

Xhorse VVDI BIM PRO vs. VVDI BMW vs. VVDI2 BMW:

	VVDI BIM PRO	VVDI BMW	VVDI2 BMW
Color	Blue	Blue	Yellow
Functions	Locksmith,programming,coding	Locksmith,programming,coding	Locksmith
Update	Software Online for free Firmware use "update kit" update for free	Software Online for free Firmware use "update kit" update for free	Software Online for free Firmware use "update kit" update for free
Support System	EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM/ BDC system	EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM / BDC system	EWS to CAS (1, 2, 3, 3++ 4, 4+)
Programming Funtion	Support Can and DOIP	Support Can	/

Xhorse VVDIBIM PRO vs VVDI BMW

Item	VVDI BIMTOOL Pro	VVDI BMW TOOL
Remark	In stock	Out of stock
Language	Chinese, English, Italian, Spanish, German, Hungarian, Polish	Chinese, English, Italian, Spanish, German, Hungarian, Polish
Program E/F chassis	Yes	Yes
Code E/F chassis	Yes	Yes
Learn OBD key	Yes for CAS1 / CAS2 / CAS3 / CAS3+ / CAS3+ ISTAP / CAS4 / CAS4+	Yes for CAS1 CAS2 CAS3 CAS3+ CAS3+ISTAP CAS4 CAS4+
File make key	Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc.	Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc.
Gnerate key for FEM/BDC system	Yes	Yes
Correct mileage	Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM / BDC system	Yes for CAS1 CAS2 CAS3 CAS3+  ISTAP CAS4 CAS4+ and FEM/BDC system
Read EEPROM & synchronous code data	Yes for CAS1 CAS2 CAS3 CAS3+	Yes For CAS1 CAS2 CAS3 CAS3+
Get ECU ISN	Yes	Yes
Support synchronous ECU and CAS,  synchronous ELV and CAS	Yes	Yes
Reset 8HP gearbox in F chassis	Yes	Yes
Exchange ECU and CAS	Yes	Yes
Add ethernet port	Yes, support 10/100M programming via Ethernet	No
WiFi	Yes, support WIFI 802.1b/g,  150Mbps high-speed connection,  and WIFI OTA upgrade	No
DoIP Vehicle/Module Programming	Yes	No
BMW ECU programming (NBT/CIC)	Yes,  connect via network cable	No
Speed up the F/G Chassis programming	Yes, connect via network cable	No
BMW E-sys and Rheingold Diagnostic System	Yes,  able to replace the specialized devices (connect via network cable)	No
Read N13/N20/N55/N63 ISN data without disassembling	Yes	No

FAQs:

1. Is vvdi bmw tool and vvdi bimtool or same tool? if not whats the difference?

A: VVDI BIM Tool is update version

2. What is the difference between VVDI BMW and VVDI2 BMW?

VVDI BMW covers all the functions of VVDI2 BMW, and also supports E/F/G programming and coding functions and 8HP gearbox computer functions.
VVDI BMW is aimed at BMW's more professional equipment. It adopts brand-new hardware, works more stable, and has higher communication efficiency. The software interface is more clear and concise, easy to operate.
The function of VVDI BMW is mainly suitable for BMW maintenance personnel, but also suitable for professional car locksmiths. It supports body module replacement, key programming, mileage repair, diagnosis and clear fault code functions.
VVDI BMW supports the key programming function from the old EWS to CAS (CAS1, CAS2, CAS3, CAS3++ CAS3++istap, CAS4, CAS4+) and the latest FEM/BDC anti-theft system.

3. What is the difference between the encoding function of VVDI BMW and Ista?

VVDI BMW and Ista are almost the same, VVDI BMW equipment uses CAN bus, and Ista is based on network cables.

4. I received the package but Xhorse VVDI BIMTool Pro doesn't work. There was no connection with the car (either via CAN or KLINE bus). I updated the device to the newest software and firmware. any iead?
Q: you should  short the component in the following printed circuit board with a zero-ohm resistor below picture