Xhorse Key Reader use case_Suzuki WagonR key cutting


Xhorse Key Reader is supported to identify Suzuki WagonR key, then working with Dolphin XP-005 to cut it directly. Very smart and convenient. Following I’ll show how to do it.

Xhorse Key Reader use case_Suzuki WagonR key cutting

 

I’ll use Xhorse App to control them, or a VVDI Key Tool Max is also workable.

 

Insert the key into Key Reader Blade Skimmer, go to

Vehicle database >> Suzuki >> Swift >> new(After 2019) >> HU87R >> OK >> Optical identification >> Identification >> Identification

Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting
 

It’s identifying automatically...

Bitting codes came out! Very quickly in a few seconds.

It says 3423124312.

Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting

Fix a new key blank to be cut on clamp in advance.

To cut >> Cutting key >> Cut

Xhorse Dolphin will start cutting key directly.

 

Process complete.

 

Remove the new key to check.

It can switch the lock. The bitting is same with the original one.

Done!

Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting
Xhorse Key Reader use case_Suzuki WagonR key cutting

Using Key Reader to work with Xhorse Key Cutting Machine is quite efficient. It only took me less than 4 minutes to finish the job.

www.xhorsestore.co.u